6
corners with sides of 112mm and 118mm. Threaded hole depth 6mm;
2) The 4 threaded holes can be directly installed and fixed with rubber damping balls, and
the installation structure can be designed according to different structures of the flying
platform. The installation method is flexible and diversified.
3. Camera Operation
3.1 Power On
3.1.1 Using SkyPort
The oblique camera use drone to supply power, power on/off in sync with the drone. Take
M300 RTK as an example. Step of power on:
1) Mount the SHARE 202S Pro on the DJI drone, and please make sure the installation is
firm.
2) Turn on the power of the drone, the camera will start to self-checking. It will take about
40s to power on. When it’s done, the camera beeps.
3) After the camera is turned on normally, the OLED will display as follows:
OLED Display
Meaning
Remark
ON
The camera is power on
When power off, it will show OFF
0
RTK status
RTK has 4 display statues
0-- no solution,
16-- single point solution
34-- floating point solution
50-- fixed solution
27
℃
Camera temperature
Current camera temperature
P
Number of instructions
triggered on taking photo
The times needed to be triggered
F, R, D, B, L
Number of taking photo
on different lens
F - the front vision, R - the right vision
D - the down vision, B - the back vision
L - the left vision
(It will restart and clear after the
camera power off)
4) During the camera start up process, the real-time data window of the Pilot screen display
interface displays the photo-unavailable state, and displays the photo-capable state after
normal booting.