12
3. Select a copy path, modify the copy settings as required, and click copy. It is
recommended to copy the data to computer local drive letter;
4. After the copy is completed, click view data to check whether the data is normal.
5. Delete the data: select the sorties which need to be deleted, click clear sorties, and wait
for completed clearing ; Or select initialize camera to clear all user data;
6. Click disconnect, the drive letter pops up to disconnect the data line.
【
Precaution
】
1)
Please delete the drive letter file by using Share Data Manager. Do not delete a drive
letter file at will.
2)
The data cannot be restored after being deleted or initialized, please operate carefully.
Before performing this operation, ensure that data is correctly backed up on the computer.
4. Camera Maintenance
Do not disassemble or alter the camera without permission. Lens distortion check and
debugging have been completed before delivery. Please do not alter or dismantle the camera
by yourself. The consequences caused by users' unauthorized modification of the camera
shall be borne by users. If you need to design or modify the camera to install and load,
please contact SHARE technical support staff.
4.1 Precaution
1. Please store the camera in a dry and ventilated place at normal temperature to avoid lens
fogging caused by excessive humidity. The recommended storage environment temperature
is from 15
℃
to 25
℃
, and the humidity less than 40%. If the lens fogs up, water vapor will
dissipate automatically after the camera is turned on and heat up for a period of time.
2. Avoid storing the camera in a place of strong vibration and strong magnetic .
3. Avoid bringing the equipment directly from cold places to warm places to prevent
moisture condensation.
4. Do not place the camera in strong light for a long time, strong light can easily stimulate
the chip and reduce the working life of the sensor.