Page 6
CA-VAT-10-R / SuperHalo Cellular Booster Kit
INSTALLATION
CA-VAT-10-R / SuperHalo Cellular Booster Kit
Page 7
Step 3. Connect the interior Antenna
A : Standard Wireless Usage - ( Recommended ) - CM248W-M
This CM248W full band panel antenna is a compact directional antenna designed to
cover 2G/3G/4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. It’s a
high gain indoor antenna suited for places where the signal needs to be broadcast over
a wide area. This interior antenna transmits and receives signal to cell phones.
Antenna CM248W-M - Installation Instruction
1. Choose location for mounting antenna on vertical surface. Ideal height from the cabin
deck or floor should be the approximate height of cellphone use.
2. Using plate, mark position of desired placement with pencil or marker.
3. Screw ( not supplied) mounting plate into place with the slide panel protruding
towards you. Provided plastic anchors are only to be used in sheetrock installation.
4. Slide antenna securely onto mounting plate.
5. Use the other CM240-M cable to connect CM248W-M to “inside” of the booster.
Note: Be sure to provide enough separation from outside antenna. Panel antenna
should not face outside antenna.
B : Low Profile Usage - (Optional ) - CM110W-M
1. The patch antenna is intended for indoor
use only. Do not mount on a surface
within 4” of metal.
2. Screw the patch antenna cable to
the connector marked "inside."
Note: Laboratory tests show that patch antenna can work
as close as 2 ft. from outside antenna if the patch antenna
is facing away from outside antenna. If booster shows oscillation,
turn it down by 3 dBs on the dial of oscillating band.