P R O D U C T I N S T R U C T I O N S
P R O D U C T I N S T R U C T I O N S
Shadow-Caster
Shadow-Caster
™™
LED Lighting | 2060 Calumet Street | Clearwater, FL 33765
LED Lighting | 2060 Calumet Street | Clearwater, FL 33765
p:
p: +1 727.474.2877
+1 727.474.2877 e:
w: shadow-caster.com
shadow-caster.com
Designed & Manufactured
Designed & Manufactured
in Clearwater, FL
in Clearwater, FL
© 2022 Shadow-Caster
© 2022 Shadow-Caster
™
LEDs. All Right Reserved.
LEDs. All Right Reserved.
2022.11
SCM-SLB-CC
SCM-SLB-CC
FULL-COLOR BRACKET MOUNT SPREADER LIGHT
FULL-COLOR BRACKET MOUNT SPREADER LIGHT
MODEL #S:
SCM-SLB-CC-BK
•
SCM-SLB-CC-WH
OPERATION
• When power is applied to the light, the brightness slowly ramps up to
full power over approximately 3 seconds
• Toggle power during ramp up to set brightness
• Subsequent power toggles will go from white, blue, red, green, aqua,
blue-violet, magenta, yellow, purple, orange, green, yellow, back to white
• To reset the light, turn off for 10 seconds
• If Shadow-NET™ is present this will override power toggle control
functions
INSTALLATION
• Find a suitable location with sufficient clearance for 1/4-20 mounting
bolt and routing waterproof cable.
• Connect power and ground. Connect optional Shadow-NET™ wires if
Shadow-Caster™ controller is present.
Optional
Shadow-NET™
Controller
SPECIFICATIONS
• Power consumption: 2 Amps at
12V, 1 Amp at 24 Volts
• 10-30V DC input
• IP67 (waterproof)
• Durable glass window
CLEANING INSTRUCTIONS
• Clean with soap and water with
a soft towel or sponge
GROUND
10-30V
Note:
No switch required when using Shadow-NET™
SWITCH NOT
NECESSARY WHEN USING
SHADOW-NET CONTROL
FUSE
