1
HUMMING PROBE
pH strip electrode
UH1 User Manual (V1.3)
1.
Product Introduction
￭
HUMMING PROBE pH test strip electrode UH1 is used together with pH measurement system
UX100/UX200, makes pH measurement simple and accurate. The unique features: calibration-
free and low sample requirement allow multiple applications feasible.
￭
UH1 strip electrode, innovatively integrates the principle of electrode measurement on a single test
strip electrode for pH measuring. It is easy to operate, calibration not needed, easy to use,
convenient to store, carry and use. Measurement can be completed fast and easy.
￭
HUMMING PROBE pH strip electrode UH1 is manufactured by UltraE Co., Ltd., and sold by
authorized dealers. If you have any questions or comments about our products, please call our
company or contact your local distributor. We will assist you as soon as possible.
￭
Product Content:
(1). UH1 : pH test strip Electrode
(2). User Manual
2.
Safety Instructions
￭
Read this user manual before using the Instrument.
￭
When you suspect the instrument is damaged, do not use it and notify us or your distributor
immediately.
￭
Always store the test Strip Electrode in the vial with cap closed when not in use to guarantee the
quality. When using, take the strip electrode out of the vial and close the vial quickly.
￭
If you have any questions about using the system, please contact us or your dealer.
3.
UH1: pH Strip Electrode Product Description
4.
Measuring pH Process
Choose Cable Socket Mode or Strip Port Mode as intended before measurement.
(1) Take the strip electrode out of the vial and close
the vial quickly.
For Cable Socket Mode ,Connect the
connection cable plug to the socket of the meter
and Insert the strip electrode into the adapter of
the cable.
(2) (1) Cable Socket Mode : Immerse the strip
sampling port end into the test sample up to the
white line of the strip. If you have a CS200 mixer,
you can attach and fix the connection cable to the
bracket.
(2) Strip Port Mode : Drop the test sample
into the strip sampling port (Fig.A) or immerse the
sampling port end into the test sample for 2
seconds (Fig.B), then insert the Strip Insert End
into the Meter Strip Port. (Fig.C)
(Fig. A) (Fig. B) (Fig. C)
(3) Press the Inspect button.
(4) When the pH stable state is displayed, the pH
measuring is accomplished as displayed on the
screen.
Sampling port
Insert End
Insert into sample up to the white line