SGMW Baojun 530 Service & Maintenance And Owner’S Manual Download Page 98

Page: 98 / 215

Lighting

Rear Reading Lamp

Type-I

The rear reading lamp has 2 working buttons:

: Press the switch and the lamp illuminates. It will not go

out until the switch is pressed again.

: The lamp gradually illuminates if the switch is pressed

and any door is opened; it works for a while and then
gradually goes out after all the doors (including liftgate) are
closed.

Type-II

For certain models, two reading lamps are installed on the
roof over the second row seats. You can press the reading
lamp switch to turn it on/off.

Luggage Compartment Illumination Lamp

The luggage compartment illumination lamp illuminates as
the liftgate is opened. It goes out after the liftgate is closed.

Note

Please do not replace with a high-power bulb (for
example, refit with a xenon headlamp) in case that the
lamp burns out or an accident arises from it.
Please turn off all lamps before you leave the vehicle.

Summary of Contents for Baojun 530
























































































































































































































Search results

Summary of Contents for Baojun 530

Reviews:

Brands by name

Popular brands

SGMW Baojun 530, Service & Maintenance And Owner’S Manual

Search results

Summary of Contents for Baojun 530

Reviews:

Brands by name

Popular brands