SGMW Baojun 530, Service & Maintenance And Owner’S Manual

Page: 65 / 215

Instruments and Controls 57
4
Ins
tr
um
e
nts
an
d Co
ntrol
s
Average Fuel Consumption
It indicates the average fuel consumption given for
reference by the driver in the current driving mode, under
the current driving cycle. Average fuel consumption can
help the driver develop a good driving habit and it indicates
in L/100 km.
In different driving modes, the reference average fuel
consumption is different.
Driving mode: driving conditions such as driving in urban
area, high-speed driving, driving at different constant
speeds, acceleration/deceleration condition, driving at the
same speed and with different gears engaged, etc.
when driving on a slope (up or down) for a long distance, or
in case of traffic jam lasting for a long time, the fuel
consumption shown on the average fuel consumption
gauge may be higher or lower than normal. This depends
on the current driving condition and it is a normal
phenomenon.
Instantaneous Fuel Consumption
It indicates the reference fuel consumption (in L/100 km) in
the current accelerator control state and under the current
driving cycle.
Driving cycle: The period from starting the engine to shutting
it down represents a driving cycle.
The instantaneous fuel consumption changes real-time as
the throttle valve opening, revolution speed and vehicle load
change.
Fuel Range
It indicates the reference mileage the vehicle can
continuously run for with the current remaining fuel amount.
It changes as the fuel consumption under the current driving
condition changes.
Fuel range is for reference only. Please add fuel as soon as
possible the fuel level low indicator illuminates.