10
Product Version 1.0 | Revision A | Released 2023-01-10
FRAMES
To create frames and shapes with the VPLs, install the fixtures with enough space for the VP cable to attach to the
next VPL. Figure 8 illustrates the two recommended orientations of the standard VPL 1220-20 and 610-20. Note that
the VPL 305-20 cannot bend a full 90 degree due to the compactness of the fixture's cable. Make sure the installa-
tion is rigid so that the fixtures cannot move and cause extensive wear on the cables. For further information or
suggestions about the VLP and their installation, please contact your local SGM distributor or SGM support at
[email protected]
Figure 8: Orientations of a corner lying flat or sideways.
