GB
SGM Technology for Lighting
Idea Spot 250 WIT070 V1.0-01NR
23
CLEANING AND MAINTENANCE
The following points have to be considered during the inspection:
1.
All screws for installing the devices or parts of the device have to be tightly connected and must not be
corroded.
2.
There must not be any deformations on the housing, color lenses, fixations and installation spots
(ceiling, suspension, trussing).
3.
Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4.
The electric power supply cables must not show any damage, material fatigue or sediments. Further
instructions depending on the installation spot and usage have to be adhered by a skilled installer and
any safety problems have to be removed.
Note:
If the external flexible cable or cord of this device is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to avoid
a hazard.
CAUTION
Disconnect from mains before starting maintenance operation.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or
solvents.
There are no serviceable parts inside the device except for the lamp. Please refer to the instructions under
‘Installation instructions’.
Should you need any spare parts, please order genuine parts from your local dealer.
TECHNICAL SPECIFICATIONS
Power supply :
-
120VAC, 50Hz;
-230VAC,50Hz;
-120VAC,60Hz;
-230VAC,60Hz;
Power consumption :
max. 400W
Lamp :
Philips MSD250/2
Packing dimensions :
61 x 47 x 60cm
Net weight :
27KG
Gross weight :
31KG
Remark:
errors and omissions for every information given in this manual excepted. All information is
subject to change without prior notice.
