6
after the track being played back currently ends. If the display is Play Later, the
track will be added to the end of the playlist.
3)
If using Diretta
(LAN DAC mode)
Connecting with Windows PC with LAN cable, you can play music with
player
software running on PC.
①
Download Diretta driver software from download page in SFORZATO web site,
and install the driver. Currently MAC version is not available.
②
Pressing buttons on front panel (described later) or configuration (described
later), go into Diretta mode.
③
Select SFOZATO Diretta ASIO driver in the Player software in PC and play.
Music starts in DSP-030EX
.
How to use DIRETTA with supported server like Fidata and Soundgenic
Since Diretta and UPnP protocols are always enabled and running, there is no switch to
change mode. Switch to UPnP deactivate the Diretta. If you access via Diretta, DSP
respond with diretta. If you access via UPnP, DSP respond with UPnP. When Diretta
enabled on FIDATA server and connected to DSP-xxx, you will see 2 players in Room
window in App:
DSP-xxх
for use UPnP protocol
[fidata]-DSPxxх
for use new Diretta protoco
l
If using USB
You can perform operations using USB rather than via LAN. Through connection
with your PC, you can play back tracks from sources that cannot be accessed through
network player features, such as YouTube and other streaming services.
①
From the download page of the SFORZATO company website, download the PC
driver. A driver is not necessary if you are using a Mac.
②
Following the installation manual, install the driver to your PC.
③
Connect your PC to DSP-030EX using a USB cable.
④
Switch to USB operation mode using front button operations (described later)
or
LAN configuration (described later).
⑤
By playing back music on your PC, sound will be transmitted through
DSP-030EX.
3)
Configuration
Pressing “Select” button on the front panel and hold makes the DSP-030EX go into
menu
mode. In menu mode, you can change player name, update software and
check software
version.
When the player goes into menu mode, front panel display shows the menu. Pressing
“Select” button navigates to the next menu. Pressing “Phase” button carries out the
menu function.
Config File: change player name
Update:
Update software using USB memory
