Mailing Address:
Shipping Address:
PO Box 1674
2666 S. Country Club Rd.
Warsaw, IN 46581-1674
Warsaw, IN 46580
Mini Landscape Rake and
Horse Trailer Rake
Assembly Instructions
Tools Needed for Assembly:
7/16” wrench (two)
Parts Shipped with Unit:
Head
Aluminum handle with grip (not shown)
Push/Pull braces (set of 2)
Bolt bag for braces
Push/Pull Brace Instructions:
1. Align holes of flat end of braces with holes on rake head, as shown,
and insert the two shortest bolts.
2. Align holes of bent end of braces with the handle, as shown, and
insert the longest bolt.
3. Start all loc nuts on bolts. Use wrenches to tighten, being careful
not to over-tighten. Over-tightening may result in crushing the
handle, thereby compromising its strength.
PK90475
01/21/15
REPLACEMENT PARTS LIST
See Reverse Side
Assembly Instructions for Handle:
1. Slide the slotted end of the handle over the center hole on the
aluminum head.
2. Align holes and insert middle sized bolt. Do not tighten until all
hardware is in place.
FULL WARRANTY
All
Seymour
Midwest products carry a full warranty against manufacturer defects in quality and workmanship.
Products which have been abused or worn out from normal use are excluded from this warranty.
We reserve the right to replace or issue credit on an individual basis.
Phone: 8
44
-
SEYMOUR
FAX: 574-267-8508
��
www.
seymourmidwest
.com
