22
3 Operation
The stored measurements can be displayed on a computer using a
readout program
. The program is available at www.sewerin.com.
Start measurement
1. Press
Menu
.
2. Select
Start measurement
from the menu. This starts the
measurement plot recording.
The measurement plot recording must always be concluded with
Stop measurement
.
Stop measurement
1. Press
Stop measurement
.
OR
a)
Press
Menu
.
b)
Select
Stop measurement
from the menu.
2. Answer
Yes
to the warning prompt.
3. Enter a comment for the measurement.
a) Select the characters required using the jog dial. Confirm
each character using the jog dial.
OR
−
Press
Open stored comments
. A list of the stored com-
ments will appear. Select the desired comment. Open the
comment with
OK
.
b) Then confirm your entry/selection with
OK
.
OR
−
Press
Esc
if you do not wish to enter a comment for the
measurement.
The measurement is saved as a protocol. The protocol name
is formed from the date, time and comment.
