Click
Press trigger briefly and release immediately
Switch on/off
●
Change menu option (select function or parameter)
●
Press
Press and hold the trigger
Open or apply menu item
●
Open settings menu
●
Locate pipe with Generator (active)
Energize pipe
1.
Switch on receiver
2.
Select NEW SET UP
3.
Select SET FREQUENCY > ACTIVE (GENERATOR) >
4.
Frequency (must correspond to G 100 frequency)
Select SET LOCATING MODE > LINE
5.
Locate pipe
6.
Locate pipe without Generator (passive)
Switch on receiver
1.
Select NEW SET UP
2.
Select SET FREQUENCY > PASSIVE > Frequency
3.
Select SET LOCATING MODE > LINE
4.
Locate pipe
5.
Locate sonde
Switch on sonde
1.
Switch on receiver
2.
Select NEW SET UP
3.
Select SET FREQUENCY > ACTIVE (GENERATOR) > Fre
-
4.
quency (must correspond to sonde frequency)
Select SET LOCATING MODE > SONDE
5.
Install the sonde
6.
Locate sonde
7.
WARNING!
Do not operate this product until you
have read and understood the relevant
operating instructions.
Trigger
30.10.2009 – 105891 – en
UtiliTrac Receiver