28
5 Performing a correlation measurement
Performing a correlation measurement
5.4
Continuing a measurement
This function starts the correlation measurement with the old
pipe data. All the previous
results from any prior correlation will
be retained.
Any pipe data which has changed since the last correlation will
not be taken into account.
You should continue the measurement if the result of the first
correlation measurement (number of averaging procedures e.g.
32) is not yet reliable enough.
Using the
arrow keys
select
“continue” and confirm by
pressing the
Enter key
.
The measuring procedure is
the same as if you were start-
ing a new measurement.
pipe data
start
continue
