16
│ 2 SeCorr system
Note:
The
C 200
receiver uses the same number and colour assign-
ment, e.g. when displaying results.
2.2.3.1 Setup
Overviews with the names of all the parts of the transmitter can
be found inside the front cover (fig. 3 to fig. 5).
Ports
The transmitter features the following ports:
●
Charging socket
For charging the rechargeable battery.
●
Microphone socket
For connecting a microphone.
Filter key
Note:
The
SeCorr
system has filter options for various purposes. An
overview of these can be found in section 2.4 on page 20.
The bandpass can be adjusted using the filter key. A bandpass is
a filter that only allows signals through from a certain frequency
range.
This function can be used to adjust the noise transmission to the
current situation. For example, when performing correlation on
plastic pipes, the quality of the measurement can be improved if
necessary using the
low pass
setting.
The options are:
