3 Operation
│
15
b) Then confirm your entry/selection with
OK
.
OR
Press
Esc
if you do not wish to enter a comment for the
measurement.
The measurement is saved as a protocol. The protocol name
is formed from the date, time and comment.
3.2.7
Protocols
You can retrieve or clear protocols of saved data under
Protocol
in the menu. When saved, the protocols are assigned to different
protocol types.
The following protocol types are available:
●
Device inspection
●
Measurements
Protocols can only be cleared individually.
You can find information on how to clear all protocols of one pro
-
tocol type in section 3.3.7.
3.2.8
Device inspection
Device inspection
only appears in the menu when the inte-
grated device inspection is switched on. The
device inspection
can be used to check the general status and the indication ac-
curacies.
Note:
The integrated device inspection is switched off in the factory
settings. More detailed information about the device inspection
The
Device inspection
symbol will appear when the
inspection is due. It is visible in the display until the
complete integrated device inspection has been car-
ried out successfully.
