7
3 Operation
3
Operation
The operation of the instrument is divided into two sections:
z
Measuring mode (see section 3.1)
Measurements are carried out in the measuring mode. The User
menu can be used to change the test mode, to store measure-
ment data and to call up protocols.
z
Extended settings (see section 3.2)
The extended settings permit to change default measurement
settings and further instrument settings (such as “Adjustment”,
“System”, “Hardware”, etc.). It is not possible to carry out a
measurement when the extended settings are opened.
3.1
Measuring mode
3.1.1
General information regarding the measuring mode
3.1.1.1 Switching on the device
The instrument is switched off.
z
Press the key for approx. three seconds.
The instrument is switched on. The two following start displays
appear:
Start display
Indication of:
-
Instrument type (MiniLec)
- Firmware
version (V3.000)
- Installed sensors
(10 l/h, 200 mbar, 2.00 bar)
Date/time
Indication of:
-
Date (15.05.2008)
-
Time (10:10)
- User data (example)
l/h
mbar
bar
10
200
2.00
MiniLec
V3.000
15.05.2008 10:10
City Council
Frank Smith
Leakage Delivery
