32
│ 3 Operation
3.4.3
Stop recording and save it with a comment
The device is in measuring mode. A recording is running.
1. Press the Enter key. The device switches to the measurement
menu.
2. Select
Stop recording
.
3. Press the Enter key. The following query appears:
Stop and
save recording?
4.
Confirm the prompt. The following query appears:
Add com-
ment?
5.
Confirm the prompt by pressing OK. The list of comments will
appear (Fig. 20).
6. Write a comment.
Information about writing comments can be found in sec-
7. Load the comment.
To do so, select the
Confirm
symbol in the drawing selection
(Fig. 22).
The recording is saved with a comment. The device returns
back to measuring mode.
3.5
Change application
In measuring mode, the symbol in the upper left corner of the
display shows the current application.
Fig. 24:
Measuring mode
(
here:
Measuring
application)
top left (information area):
Symbol of the current application
