57
5 Maintenance
5.1.2.2 Concluding the device inspection
After all the tests have been carried out as described in sec-
tion 5.1.3 to 5.1.5, the
Save
symbol will appear in the display.
An integrated device inspection is concluded by saving it. Up to
40 device inspections can be saved. The following information
can be stored along with the device inspection:
● Inspector (e.g. inspector's name or initials)
●
Password to protect the protocol from being accessed by un-
authorised people
Inspector entries are saved automatically (ring memory with max.
10 entries).
Once the first inspector has been entered, the
Open
stored inspectors
function will become available.
1. Press
Save
.
2. Enter the name of the
inspector
.
a) Select the characters required using the jog dial. Confirm
each character using the jog dial.
OR
−
Press
Open stored inspectors
. A list of the stored in-
spectors will appear.
−
Select the desired inspector. Open the inspector with
OK
.
b) Then confirm your entry/selection with
OK
.
OR
Press
Esc
if you do not wish to enter an inspector for the
device inspection.
3. Enter a
password
.
a) Select the characters required using the jog dial. Confirm
each character using the jog dial.
b) Then confirm your entry with
OK
.
OR
Press
Esc
if you do not wish to enter a password for the
device inspection.
