34
3 Operation
Note:
Measurements cannot be cancelled. The only way to cancel a
measurement is to stop it.
Up to 80 measurements can be saved.
The measurement values can be saved with or without a com-
ment. Comment entries are saved automatically (ring memory
with max. 10 entries).
Once the first comment has been entered, the
Open
stored comments
function will become available.
The stored measurements can be displayed on a computer using
a
readout program
. The program is available at www.sewerin.
com.
Starting a measurement
1. Press
Menu
.
2. Select
Start measurement
from the menu. This starts the
measurement plot recording.
The measurement plot recording must always be concluded with
Stop measurement
.
Stopping a measurement
1. Press
Stop measurement
.
OR
a)
Press
Menu
.
b)
Select
Stop measurement
from the menu.
2. Answer
Yes
to the warning prompt.
3. Enter a
comment
for the measurement.
a) Select the characters required using the jog dial. Confirm
each character using the jog dial.
OR
−
Press
Open stored comments
. A list of the stored com-
ments will appear.
−
Select the desired comment. Open the comment with
OK
.
