50
│ 9 Protocols and information
9.2
Information
The following information can be displayed:
●
ATS
Information about the
ATS
test set
●
Gas status
Test gases assigned to test gas connections
●
Connected device (PM)
Information about the device used in the test set
ATS
The following information about the test set is displayed:
−
Product variant and serial number
−
Firmware version
Fig. 36: Information – ATS
Gas status
The following are displayed for each test gas connection of the
test set:
−
Assigned test gas
−
Current pressure of the connected test gas (as numeric value
and graphically)
Note:
The gas status shows the gas assignment set by the user. If
errors are made during assignment, the gas assignment will not
correspond to the actual situation.