42
│ 7 Device inspections
Fig. 31: Inverse display
of the device
b)
Device condition: Signal light and buzzer switched on?
Is the audible signal audible and the visual signal visible?
c)
Device condition: Housing OK?
Is the device housing free of external damage?
The device condition check is now complete.
6.
Depending on the configuration of the test set using the
GasCom
software:
−
The device inspection is automatically saved with the serial
number of the test set.
OR
a) The user list appears. Select a user from the list.
b) If necessary:
−
Enter the PIN code of the user
5
.
c) Press the Enter key.
The device inspection is saved with the selected user
name.
The device inspection is complete. The result (fig. 29) is dis
-
played until the device is removed or the Enter key or the
Menu key is pressed.
5
Optionally defined in
GasCom
software under
Tools
>
User manage-
ment
.