6 Settings
│
31
6
Settings
6.1
General information about the settings
A distinction is made between the following settings:
●
Settings that can only be set using the
GasCom
software
●
Settings that can only be set using a test set
●
Settings that can be set either by the test set or using the
GasCom
software
When a test set is connected to a computer on which the
GasCom
software is started:
●
The current settings of the test set can be read out and edited
in the software.
●
Settings made using software must be transferred to the test
set.
6.2
Settings using the GasCom software
Note:
The test set must only be configured using the
GasCom
software
by specialist technicians.
A number of settings for the test set are made on the computer
using the
GasCom
software.
They include:
●
Language
●
Date format
● Behaviour of the test set during initial start-up, when switching
on, when saving device inspections
●
Timer
●
Managing test gases
●
Managing protocols
The
GasCom
software can be downloaded free of charge from
www.sewerin.com.