4 Operation
│
17
Fig. 13: Language
Special features with significantly modified test gas
pressure
When the test set is switched off, the pressure values of all con
-
nected test gases are saved. At the start of the next switch-on
process, the saved values are compared internally with the cur
-
rent values. If there is a significant difference, then the gas as
-
signment must be carried out again after the start images (fig. 9).
4.2
Switching off the test set
Switching off the test set takes approx. 3 seconds. During the
switch-off process, the display shows:
−
ATS switching off …
message
−
Progress bar
Fig. 14: Display during switch-
off
●
Hold down the ON/OFF key until the message has disap-
peared.
Cancelling switch-off
While the
ATS switching off …
message is displayed, the
switch-off process can be cancelled.
●
Release the ON/OFF key before the message disappears.