38
│ 3 Using the system
3.8
Saving recorded measurements
Recorded measurements can be saved. Over 70 measurements
can be saved.
Measurements lasting up to 60 seconds are saved in full. If the
measurement is longer, only the first 60 seconds are saved.
A message will appear when the memory is full. Measurements
can be deleted from the memory to free up space. For information
about deleting saved measurements, please refer to section 3.11
Note:
Measurements that are not saved are automatically deleted when
the receiver is switched off.
SEWERIN recommends: Save measurements that contain a lot
of information. In this way, you can create a database to com-
pare noises.
The
Audio player 1/2
menu is open.
1. Tap the measurement you want to save in the measurement
value selection.
2. Tap the
Save
button. The
Save noise
menu appears.
3. Measurements can be saved with or without additional infor-
mation.
●
Tap
Confirm
to save the measurement without additional
information.
OR
a) First add the relevant additional information to the meas-
urement.
−
Additional information about the
surface
,
pipe material
and
suspected leak
is selected from lists.
− Free text can be entered under
Comment
. The comment
can be up to a maximum of 25 characters long.
