6
3 Use
3.3
Charging equipment
When fully charged the instru
-
ments have a maximum ope-
rating time of approx. 12 hours.
To charge an instrument you need
the docking station HS 1,2 A (see
fig.), which can be used either in
the workshop or in the emergency
vehicle .
The docking station has the fol
-
lowing sockets on its side:
z
AC/DC adapter M4,
100 – 240 V~
z
Vehicle cable M4 for 12 V
3.4
Charging
Note:
Charging the accumulator only within temperature
range 0 – 45 °C.
z
Switch off the instrument and
plug it into the docking station.
The following (or similar) ap
-
pears in the display:
z
The instrument now has 5 op
-
erating hours (= 5 bars) left. It
will take another 3 hours to be
fully charged.
The actual operating time
depends on the accumulators’
condition (age ...) and opera
-
tion (light, volume ...) charging
time takes max. 4 hours.
z
When it is fully charged all the
bars appear and the number
display disappears.
