SEW MOVIDRIVE MDX60B, User Manual

Page: 9 / 144

Manual – MOVIDRIVE® MDX60B/61B Communication and Fieldbus Unit Profile
9
3
Content of the manual
Introduction
3 Introduction
3.1 Content of the manual
The manual describes the communication interfaces of the MOVIDRIVE
®
MDX60B/61B
inverter:
• 2 serial interfaces
• 2 CAN interfaces, one via DFC11B option card
• Fieldbus or Ethernet interface depending on the installed option card
The manual provides a description of the connection, configuration parameters, as well
as of the process and parameter data exchange via the communication interfaces of
MOVIDRIVE
®
B.
The manual also describes how MOVITOOLS
®
MotionStudio communicates with
MOVIDRIVE
®
B using the communication interfaces, and how programmable logic -
controllers (PLC) can control MOVIDRIVE
®
B via the communication interfaces.
3.2 Additional documentation
For simple connection of MOVIDRIVE
®
B to fieldbus systems, have the following
documents at hand in addition to the manual:
• MOVIDRIVE
®
MDX60/61B system manual
• MOVIDRIVE
®
B list of parameters
The MOVIDRIVE
®
B list of parameters describes the device parameters for every
device firmware and includes a list of all device indices and error codes. It supple-
ments the system manual as the latter is not rewritten for every firmware version.
• The manual of the fieldbus option used (e.g. DFP21B)
The manuals on the fieldbus options and the manual at hand describe the access to
process and parameter data in general and do not include a detailed description of
all the possible control concepts.