SEW MOVIDRIVE MDX60B, User Manual

Page: 8 / 144

8
Manual – MOVIDRIVE® MDX60B/61B Communication and Fieldbus Unit Profile
2
Other applicable documentation
Safety Notes
2 Safety Notes
2.1 Other applicable documentation
Only electrical specialists are allowed to perform installation and startup observing
relevant accident prevention regulations and the MOVIDRIVE
®
MDX60B/61B operating
instructions.
Read through these documents carefully before you commence installation and startup
of the communication interfaces of MOVIDRIVE
®
B.
As a prerequisite to fault-free operation and fulfillment of warranty claims, you must
adhere to the information in the documentation.
2.2 General notes on bus systems
MOVIDRIVE
®
B has communication interfaces that make it possible to adapt the
MOVIDRIVE
®
B inverter to the particulars of the machinery within wide limits. As with all
bus systems, there is a danger of invisible, external (as far as the inverter is concerned)
modifications to the parameters which give rise to changes in the unit behavior. This
may result in unexpected (not uncontrolled) system behavior.
2.3 Safety functions
The MOVIDRIVE
®
MDX60B/61B inverters may not perform safety functions without
higher-level safety systems. Use higher-level safety systems to ensure protection of
equipment and personnel. For safety applications, ensure that the information in the
following publications is observed: "Safe Disconnection for MOVIDRIVE
®
MDX60B/61B".
2.4 Hoist applications
MOVIDRIVE
®
MDX60B/61B is not designed for use as a safety device in hoist applica-
tions.
Use monitoring systems or mechanical protection devices as safety equipment to avoid
possible damage to property or injury to people.
2.5 Waste disposal
Observe the applicable national regulations.
Dispose of the following materials separately in accordance with the country-specific
regulations in force, as:
• Electronics scrap
• Plastic
• Sheet metal
• Copper