manualshive.com logo in svg

SEW-Eurodrive WOP11D-100-0, Operating Instructions Manual

Share
Download
SEW-Eurodrive WOP11D-100-0 Operating Instructions Manual Download Page 32

5

Electrical installation

Connections

Operating Instructions – WOP11D-70-0, WOP11D-100-0 and WOP11D-150-0

32

5.2

Connections

The connections of the device depend on the device version used.

5.2.1

Web operator panels WOP11D-70-0 and WOP11D-100-0

The following figure shows the connection options on the bottom of the device.

[2]

[3]

[1]

33963470859

[1]

X1: Socket for DC 24 V voltage supply  (→ 

2

 46)

(pluggable terminal socket, 3‑pin)

[2]

X9: USB interface, 2 × USB host 2.0 (type A)  (→ 

2

 46)

[3]

X5: Ethernet interface NET1, 1 × 10/100/1000 Mbit  (→ 

2

 46) 

shielded RJ45 (IP address: 192.168.1.100)

The following figures show the connection options on the side of the device.

Web operator panel WOP11D-70-0

[2]

[1]

33963516043

Web operator panel WOP11D-100-0

[1]

[2]

34064676875

[1]

X3: Card slot for micro SD memory cards up to 2 GB and SDHC memory cards
up to 32 GB

[2]

Grounding lug for optional grounding of the device  (→ 

2

 34).

26860481/EN – 03/2021

Summary of Contents for WOP11D-100-0





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands