2
Safety notes
Designated use
Operating Instructions – WOP11D-70-0, WOP11D-100-0 and WOP11D-150-0
11
2.4
Designated use
This product is used for operation and display of industrial and commercial systems.
The product is intended for control cabinet installation in electrical plants or machines.
In case of installation in electrical systems or machines, startup of the product is pro-
hibited until it is determined that the machine meets the requirements stipulated in the
local laws and directives. For Europe, Machinery Directive 2006/42/EC as well as the
EMC Directive 2014/30/EU apply. Observe EN 60204-1 (Safety of machinery - elec-
trical equipment of machines). The product meets the requirements stipulated in the
Low Voltage Directive 2014/35/EU.
The standards given in the declaration of conformity apply to the product.
Technical data and information on the connection conditions are provided on the
nameplate and in chapter "Technical data" in the documentation. Always comply with
the data and conditions.
Unintended or improper use of the product may result in severe injury to persons and
damage to property.
2.5
Functional safety technology
The product must not perform any safety functions without a higher-level safety sys-
tem unless explicitly allowed by the documentation.
2.6
Transportation/storage
Inspect the shipment for damage as soon as you receive the delivery. Inform the ship-
ping company immediately about any damage. If the product is damaged, it must not
be assembled, installed or started up.
If necessary, use suitable, sufficiently dimensioned handling equipment.
Observe the information on climatic conditions in chapter Technical data of the docu-
mentation.
Store the product in a dry, dust-free room if you do not install it right away.
Remove the power plug from the power supply if you do not use the product for a long
period of time. If the product needs to be stored, repack it to prevent damage.
Use the original packaging when shipping the product. The original packaging of the
product is designed to withstand impact and it protects the product sufficiently. During
packing or unpacking products, always take the impact and ESD protection into ac-
count and use a work envelope that is EOS/ESD protected.
2.7
Setup/installation
The following applications are prohibited unless the device is explicitly designed for
such use:
•
Operation in a mining facility or outdoors
•
Operation in potentially explosive atmospheres and high fire risk areas
•
Use in areas with a strong magnetic field
•
Use in direct sunlight
26860481/EN – 03/2021
