manualshive.com logo in svg

SEW-Eurodrive SLC Series, Operating Instructions Manual, Page: 46 / 64

Share
Download
SEW-Eurodrive SLC Series Operating Instructions Manual Download Page 46

11

Attachment

Technical information on MOVIDRIVE®

Operating Instructions – SLC Synchronous Linear Motors

46

11.2

Technical information on MOVIDRIVE

®

Technical

information

on

MOVIDRIVE

®

In general, SLC linear motors can also be operated with MOVIAXIS

®

 or MOVIDRIVE

®

B with a suitable encoder system. In connection with NL16 linear encoders, operation
is only possible with MCV special design -0E.

INFORMATION

You will find additional information in the MOVIDRIVE

®

 

compact

 system manual.

Part number and
status

MCV40A0066-5A3-4-0E is available via part number 08295107.

The units have a status label for the power section and one for the control unit. They
are attached to the side of the unit next to the nameplate.

At least version 71 must be displayed in the first status field of the control unit for oper-
ation according to chapter 7.2.

[1]

[2]

[3]

Steuerkopf

Leistungsteil

15837756811

[1]

Component/part

[2]

Status

[3]

Type designation

11.3

Painting

Primary

The primaries are treated with an anti-corrosion coating OS1.

Secondary

The base plate of the secondaries is electrogalvanized.

22488669 /EN – 06/2016

Summary of Contents for SLC Series

































































Reviews:

No comments