7
Startup
Prerequisites for startup
Operating Instructions – SLC Synchronous Linear Motors
28
7
Startup
DANGER
Risk of injury due to electric shock.
Severe or fatal injuries.
•
When motors are powered from inverters, you must observe the wiring instruc-
tions issued by the inverter manufacturer. Observe the operating instructions of
the inverter.
NOTICE
Improper startup may result in damages to the linear motor.
Possible damage to property.
•
Strictly adhere to the notes in this chapter.
•
Never work in the travel range when the machine is switched on.
•
Ensure free axis travel.
•
Check the final positions.
•
Check the linear measuring system prior to starting the machine.
•
Limit the maximum power in the inverter.
•
Set the velocity limits in the inverter to small values.
•
Observe the safety notes in the individual chapters.
7.1
Prerequisites for startup
Before startup, make sure that:
•
The mobile part of the application moves along the entire travel section easily,
without collisions and free from mechanical contact between the primary and sec-
ondary
•
All connections have been made properly
•
All protection devices have been installed correctly
•
All motor protection devices are active
•
The brake works correctly in hoists
•
You have a MOVIDRIVE
®
MCV 0E or 5E
•
There are no other sources of danger present
•
The MOVITOOLS
®
startup software is installed on your PC.
22488669 /EN – 06/2016