2
Safety notes
Transportation/storage
Operating Instructions – OPT11D-150-0
10
2.6
Transportation/storage
Inspect the shipment for damage as soon as you receive the delivery. Inform the ship-
ping company immediately about any damage. If the product is damaged, it must not
be assembled, installed or started up.
If necessary, use suitable, sufficiently dimensioned handling equipment.
Observe the information on climatic conditions in chapter Technical data of the docu-
mentation.
Store the product in a dry, dust-free room if you do not install it right away.
Remove the power plug from the power supply if you do not use the product for a long
period of time. If the product needs to be stored, repack it to prevent damage.
Use the original packaging when shipping the product. The original packaging of the
product is designed to withstand impact and it protects the product sufficiently. During
packing or unpacking products, always take the impact and ESD protection into ac-
count and use a work envelope that is EOS/ESD protected.
2.7
Setup/installation
The following applications are prohibited unless the device is explicitly designed for
such use:
•
Operation in a mining facility or outdoors
•
Operation in potentially explosive atmospheres and high fire risk areas
•
Use in areas with a strong magnetic field
•
Use in direct sunlight
2.8
Electrical connection
Familiarize yourself with the applicable national accident prevention regulations before
working on the product.
Perform electrical installation according to the pertinent regulations (e.g. cable cross-
sections, fusing, protective conductor connection). The documentation at hand con-
tains additional information.
Ensure that all of the required covers are correctly attached after the electrical installa-
tion.
Protective measures and protection devices must comply with the regulations in force.
26867257/EN – 02/2021
