7
Technical data
CE marking, UL approval and C-Tick
Operating Instructions Basic Unit – MOVITRAC
®
B
29
7
Technical data
7.1
CE marking, UL approval and C-Tick
7.1.1
CE marking
Low voltage
directive
MOVITRAC
®
B frequency inverters comply with the regulations of the Low Voltage
Directive 73/23/EEC and have the CE mark on the nameplate to this effect.
Electromagnetic
compatibility
(EMC)
The designated use of MOVITRAC
®
B frequency inverters is as components for instal-
lation in machinery and systems. They comply with the EMC product standard
EN 61800-3
Variable-speed electrical drives
. Provided the installation instructions are
complied with, they satisfy the relevant requirements for the CE marking for the entire
machine / system in which they are installed, on the basis of the EMC Directive 89/336/
EEC. For detailed information on EMC-compliant installation, refer to the publication
"Electromagnetic Compatibility in Drive Engineering" from SEW-EURODRIVE.
Compliance with limit classes A and B has been tested on a specified test setup. SEW-
EURODRIVE can provide detailed information on request.
7.1.2
UL approval
UL and cUL approval has been granted for the MOVITRAC
®
B sizes 0S and 0L.
cUL approval has been applied for for the other units. cUL is equivalent to CSA.
7.1.3
C-Tick
C-Tick approval has been applied for for the entire MOVITRAC
®
B series. C-Tick certi-
fies conformity with ACA (Australian Communications Authority) standards.
P
i
f
kVA
Hz
n
