2
Interface box
Electrical installation
Addendum to the Operating Instructions – MOVIPRO
®
– Accessories
17
2.8.5
DC 24 V supply
The MOVIPRO
®
is equipped with a DC 24 V output that can be used to supply the
MOVIPRO
®
from the DC link.
To use the DC 24 V supply from the DC link, you must jumper the following terminals
in the interface box:
•
1 with 3
•
2 with 4
The following figure shows the wiring for using the DC 24 V supply from the DC link:
1 2
3 4
18014400675416459
INFORMATION
If you use an external DC 24 V backup voltage, do not connect terminals 1 and 2.
To use an external DC 24 V backup voltage, connect it to the following terminals:
•
3
•
4
The following figure shows the wiring for using an external DC 24 V supply:
1 2
3 4
18014400675412875
23106913/EN – 02/2018
