manualshive.com logo in svg

SEW-Eurodrive MOVIPRO PHE Series, Operating Instructions Manual, Page: 30 / 100

Share
Download
SEW-Eurodrive MOVIPRO PHE Series Operating Instructions Manual Download Page 30

5

Mechanical installation

Installation

Operating Instructions – MOVIPRO

®

 PHE..B-A15-.1X0..B-00

30

5.5

Installation

 WARNING

Electric shock from live connections.

Severe or fatal injuries.

•

Avoid contact with the signal feed connector X1261 at the rear of the device us-
ing constructive measures.

NOTICE

External force too high.

Damage to the thread or the screw.

•

Do not exceed the maximum tightening torque of 3.1 Nm – 3.5 Nm.

Use the accessories that are available from SEW‑EURODRIVE for mounting:

•

"Mounting kit with EMS angle brackets", part number 28218248

The included brackets are mounted to the narrow sides of the device.

Use one of the following mechanical mounting options:

Design

Fastening

1

Fixed angle brackets

•

4 × screwed

2

Tapped holes on the back of
the device

See chapter "Technical
data" (→ 

2

 82)

•

4 × screwed

23576855/EN – 10/2017

Summary of Contents for MOVIPRO PHE Series





































































































Reviews:

No comments