11
Technical data and dimension sheets
Technical data
Operating Instructions – MOVIMOT
®
advanced
241
Derating depending on the installation altitude
The following diagram shows the factor f
AH
(according to IEC 60034-1:2017, Table 12)
by which the thermal motor torque has to be reduced depending on the installation
altitude H. Observe the additional chapter "Technical data and dimension drawings" >
"Derating depending on the ambient temperature".
h
0
0.2
0.4
0.6
0.8
1.0
1.2
0
1000 m
2000 m
3000 m
4000 m
3800 m
5000 m
f
AH
25852074635
Notes
INFORMATION
Derating is based on typical operating conditions with a supply voltage of 24 V
(sensor supply, input voltage of STO input).
11.3.4
Current-carrying capacity of terminals
Current carrying capacity of terminals
Line terminals
X1
24 A (max. loop-through current)
Line terminals
X1a
24 A (max. loop-through current)
Control terminals
X9
10 A (max. loop-through current)
11.3.5
DC 24 V supply
Input for the independent backup voltage supply of the electronics
DC 24 V input
24V_IN
U
IN
= DC 24 V -10%/+20% according to EN 61131-2
Current consumption:
I
E
≤ 500 mA, typically 100 mA for electronics
•
Plus up to 100 mA, for sensor supply
0V24_IN
25891936/EN – 05/2020
