SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Operating Instructions Manual

Page: 48 / 416

4
Mechanical installation
Shaft-mounted gear unit with TorqLOC® (customer shaft without contact shoulder)
Operating Instructions – MOVIGEAR
®
performance
48
15. Make sure that all screws are loosened and slide the shrink disk onto the hollow
shaft.
18014420038365835
16. Slide the counter bushing onto the customer shaft and into the hollow shaft.
N
O
C
O
F
L
U
ID
®
18014420038368267
17. In the case of a gear unit with shaft shoulder , mount the shrink disk at the shaft
shoulder up to the stop. In the case of a gear unit without shaft shoulder , mount
the shrink disk at a distance of 6.5 mm to 7.5 mm from the gear unit housing.
18. Tap lightly on the flange of the counter bushing to ensure that the bushing is fitted
securely in the hollow shaft.
18014420038370699
25945475/EN – 04/2019