SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Operating Instructions Manual, Page: 197 / 416

8
Service
Fault table standard
Operating Instructions – MOVIGEAR
®
performance
197
Subfault: 25.30
Description: Initialization error – replaceable memory module
Response: Output stage inhibit
Cause Measure
The formatting of the replaceable memory
module does not match. Restore delivery state. NOTICE: All the data on
the replaceable memory module will be reset to
default.
Initialization error of replaceable memory module
after delivery state. Contact SEW-EURODRIVE Service.
Subfault: 25.31
Description: Runtime error – replaceable memory module
Response: Emergency stop + output stage inhibit
Cause Measure
Runtime error of replaceable memory module. Contact SEW-EURODRIVE Service.
Subfault: 25.32
Description: Replaceable memory module not compatible
Response: Output stage inhibit
System state: Fault acknowledgment with CPU reset
Cause Measure
The inserted replaceable memory module cannot
be used. Replace the memory module.
Subfault: 25.50
Description: Runtime error – replaceable safety memory module
Response: Output stage inhibit
System state: Fault acknowledgment with CPU reset
Cause Measure
Runtime error of the replaceable safety memory
module. Contact SEW-EURODRIVE Service.
Subfault: 25.51
Description: Initialization error – replaceable safety memory module
Response: Warning
Cause Measure
Initialization error of the replaceable safety
memory module. Contact SEW-EURODRIVE Service.
Subfault: 25.61
Description: Error – restore point
Response: Emergency stop + output stage inhibit
Cause Measure
Failed to create restore point. Delete restore point.
25945475/EN – 04/2019