SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Operating Instructions Manual

Page: 186 / 416

8
Service
Fault table standard
Operating Instructions – MOVIGEAR
®
performance
186
Subfault: 18.3
Description: Task system warning
Response: Warning
Cause Measure
Error detected while processing the internal task
system. This can for example be a timeout for
cyclic tasks. – Acknowledge the warning.
– Contact SEW-EURODRIVE Service if the warn-
ing occurs regularly.
Subfault: 18.4
Description: Task system
Response: Output stage inhibit
System state: Fault acknowledgement with CPU reset
Cause Measure
A fault was detected during the processing of the
internal task system. This can for example be a
timeout for cyclic tasks. – Switch the device off and on again.
– Contact the SEW‑EURODRIVE Service if the
fault persists.
Subfault: 18.7
Description: Fatal error
Response: Output stage inhibit
System state: Fault acknowledgement with CPU reset
Cause Measure
Fatal software error. – Switch the device off and on again.
– If the error occurs repeatedly, replace the
device and send it together with the error number
to SEW-EURODRIVE. For further support, con-
tact SEW-EURODRIVE Service.
Subfault: 18.8
Description: Invalid fault code
Response: Output stage inhibit
Cause Measure
Invalid fault code requested. – Switch the device off and on again.
– Contact the SEW‑EURODRIVE Service if the
fault persists.
25945475/EN – 04/2019