SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Operating Instructions Manual, Page: 152 / 416

8
Service
Fault messages with parameterizable response
Operating Instructions – MOVIGEAR
®
performance
152
Fault Description Index
no. Possible fault response
Electromechanical capa-
city utilization – prewarn-
ing Here you can set the device re-
sponse to an exceeded prewarning
threshold for electromechanical ca-
pacity utilization (index 8336.2). 8622.10
• No response
• Warning
• Application stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit)
• Inhibit output stage
HW limit switches – cur-
rent parameter set 8572.1 • No response
• Emergency stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit) with self-
reset
SW limit switches – cur-
rent parameter set 8572.2
• No response
• Emergency stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit) with self-
reset
Encoder – warning Here you can set the device re-
sponse to an encoder warning. 8622.13
• Warning
• Application stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit)
• Inhibit output stage
Encoder – fault Here you can set the device re-
sponse to an encoder fault. 8622.14 • Application stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit)
• Inhibit output stage
Application heartbeat
timeout
(only with DSI designs)
Here you can set the device re-
sponse to a timeout of the applica-
tion heartbeat. 8622.21
• Warning
• Application stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit)
• Inhibit output stage
25945475/EN – 04/2019