SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Operating Instructions Manual

Page: 129 / 416

6
Startup
DIP switches
Operating Instructions – MOVIGEAR
®
performance
129
DIP switch S2 (PROFINET, EtherNet/IP™, Modbus TCP)
The following table shows the functions of DIP switch S2:
DIP
switch S2
1 2 3 4
Meaning Local mode Reserved Reserved Reserved
ON Local mode can be activated
in every drive state.
– – –
OFF Local mode can only be
activated when the output
stage is inhibited
1)
– – –
1) The factory settings are shown in boldface.
Do not alter the factory setting of DIP switches S2/2 through S2/4 = OFF.
DIP switch S1 (POWERLINK)
The following table shows the functions of DIP switch S1:
DIP switch S1
1 2 3 4
Binary coding POWERLINK device address
Bit 2
0
Bit 2
1
Bit 2
2
Bit 2
3
ON 1 1 1 1
OFF 0 0 0 0
DIP switch S2 (POWERLINK)
The following table shows the functions of DIP switch S2:
DIP switch S1
1 2 3 4
Binary coding POWERLINK device address
Bit 2
4
Bit 2
5
Bit 2
6
Bit 2
7
ON 1 1 1 1
OFF 0 0 0 0
DIP switch S3
The S3 DIP switches on the memory module are reserved.
Do not change the factory setting of the S3 DIP switches = OFF.
25945475/EN – 04/2019