SEW-Eurodrive MOVIGEAR MGFx-DSI Series, Operating Instructions Manual

Page: 61 / 408

4
Mechanical installation
Torque arm
Operating Instructions – MOVIGEAR
®
performance
61
4.10.1 Installation options
The following figure shows the possible mounting positions of the torque arm:
90
°
[A]
[B]
[4]
[1] [2]
[3]
25347868811
[1] Torque arm axis length
[2] Bore diameter
[3] Torque arm thickness
[4] Bush with bearings on both ends
The following table shows the required tightening torques:
Drive Torque arm Tightening torque
Part num-
ber
[1]
Axis
length
[3]
Thick-
ness
[2]
Bore Ø
Screw [A] Screw [B]
MGF.T2-..-C 24850497 130 mm 6 mm 13 mm M10 48 Nm M12 20 Nm
MGF.T2-..-C 24850357 160 mm 10 mm 13 mm M10 48 Nm M12 20 Nm
MGF.T4-..-C 24849405 160 mm 10 mm 13 mm M12 70 Nm M12 20 Nm
25887548/EN – 04/2019