SEW-Eurodrive MOVIGEAR MGFx-DSI Series, Operating Instructions Manual

Page: 27 / 408

3
Unit structure
Example nameplate and type designation of electronics
Operating Instructions – MOVIGEAR
®
performance
27
3.11 Example nameplate and type designation of electronics
3.11.1 Nameplate
The following figure gives an example of a nameplate of the connection unit. For the
structure of the type designation, refer to the chapter "Type designation".
[1]
[2]
Type: CUI1H-DSI-5D3-C/DI
S0#:
Eingang/Input
U= AC 3x380...500V
I= AC 1.9A
f= 50...60Hz
T= -25°C...+40°C ML 03
Status: 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00
U= 3x0V...Uinput
I= AC 2.0A
AC 6.0A Imax=
f= 0...599Hz
Ausgang/Output
01.7569637422.0001.19
Type: DSI10A-0020-503-A-000-000
S0#: 01.7569637422.0001.19
00 00 00 00 00 00 00 00 00
D-76646 Bruchsal
Made in Germany
28259199883
[1] Connection unit nameplate
[2] Electronics cover nameplate
3.11.2 Type designation of the electronics cover
The following table shows the type designation of the electronics cover:
DSI Product family
DSI = Electronics cover D irect S ystem bus I nstallation
1 Communication type
1 = EtherCAT
®
/SBus
PLUS
0 Connection configuration
0 = M12 plug connector on electronics cover (standard)
A Communication version
–
0020 Nominal current drive unit
0020 = 2.0 A
0025 = 2.5 A
0032 = 3.2 A
0040 = 4.0 A
0055 = 5.5 A
–
5 Connection voltage
5 = AC 500 V
0 Power section design EMC
0 = Basic interference suppression
25887548/EN – 04/2019