66
Operating Instructions – MOVIGEAR® DAC-B
5
Plug connectors
Electrical Installation
5.6
Plug connectors
The wiring diagrams of the plug connectors display the contact end of the connection.
5.6.1
Designation key
The designation of the plug connectors is specified according to the following key:
5.6.2
Connection cables
Connection cables are not included in the scope of delivery.
You can order prefabricated cables from SEW-EURODRIVE. These cables are
described in the following chapters. Specify the part number and length of the required
cable in your order.
The number and design of the required connection cables depend on the design of the
units and the components to be connected. This is why not all cables that are listed are
actually required.
The following figures show the different cable designs:
X
2
0
1
2
_
Sequence number (optional)
In case of several plug connectors in one group
Group number (optional)
with several plug connectors with the same function
Type
Connection diagram of the plug connector within a function
Function
Function of a plug connector within a group
Group
1 = Power input
2 = Power connector
3 = Encoder
4 = Bus
5 = Inputs and outputs
Terminal
Cable
Length
Installation type
Set length
Suitable for cable
carriers
Not suitable for
cable carrier
installation
Variable length
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
