Operating Instructions – MOVIGEAR® DAC-B
57
5
Installation instructions
Electrical Installation
5.2.7
Notes on PE connection of MOVIGEAR
®
Earth-leakage currents
≥
3.5 mA may occur during normal operation. To meet the
requirements of EN 61800-5-1 observe the following note:
• Route a second PE conductor with the cross section of the supply system lead in
parallel to the protective earth via separate terminals or use a copper protective earth
conductor with a cross section of 10 mm
2
.
DANGER
Incorrect connection of PE.
Death, severe injuries or damage to property from electric shock.
• The permitted tightening torque for the screw fitting is 2.0 to 2.4 Nm (18...21 lb.in).
• Observe the following notes regarding the PE connection:
Prohibited assembly sequence
Recommendation:
Assembly with forked cable lug
Permitted for all cross sections
Assembly with thick solid wire
Permitted for cross sections up to
max. 2.5 mm
2
2377711243
2377688075
2377672587
[1] Forked cable lug suitable for M5 PE screws
[1]
M5
2.5 mm²
M5
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
