Operating Instructions – MOVIGEAR® DAC-B
221
13
Package for applications in wet areas
Technical Data and Dimension Sheets
13.6.2 HP200 surface
Characteristics
Thermoplastic fluorinated polymer coating with nearly non-porous surface, excellent
antistick properties and chemical resistance. Approved for contact with food.
Properties
The HP200 surface has the following properties:
Cleaning
Do not mix cleaning and disinfecting agents under any circumstances!
Never mix acids and chloralkalis, as poisonous chlorine gas will result.
Strictly observe the safety instructions of the cleaning agent manufacturer.
INFORMATION
The information in this chapter is based on the current technical knowledge and
experience. No legally binding guarantee of certain properties or of the suitability for a
specific application purpose can be derived from the given information.
HP200 surface
Anti-stick properties
very good
Abrasion resistance
good, not suited for abrasion or high pressure
Chemical resistance
very good
Solvent resistance
not soluble
Corrosion resistance
DIN 50021, > 1000 h depending on layer structure
Flammability
not flammable
Temperature resistance
–40 to +200° C, thermoplastic behavior
Layer thickness
approx. 25
μ
m
Color
silver gray
Food grade approval
approved according to German Federal law and
US FDA (no. 21 CFR 175.300)
P
i
f
kVA
Hz
n
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
