188
Operating Instructions – MOVIGEAR® DAC-B
11
Description of status and operating indicators
Service
11.5 Description of status and operating indicators
11.5.1 MOVIGEAR
®
LED displays
The following figure shows the MOVIGEAR
®
LEDs:
11.5.2 LED "NET"
2374715915
[1] LED NET
[2] RUN LED
[3] "DRIVE" status LED
DRIVE
RUN
NET
[1]
[2]
[3]
"NET" LED in conjunction with binary slave GLK30A
LED
color
LED status
Operating state
Description
-
Off
Not ready
No 24 V supply connected to the AS-Interface
Green
Illuminated
Ready
•
Normal mode
•
24 V supply connected to the AS-Interface OK
•
Communication present
Red
Illuminated
Not ready
Communication interrupted or slave address is set to 0
Red/
green
Flashes
regularly
Not ready
Communication or peripheral error
Yellow
Illuminated
Ready
Manual mode/local mode active
"NET" LED in conjunction with double slave GLK31A
LED
color
LED status
Operating state
Description
-
Off
Not ready
No 24 V supply connected to the AS-Interface
Green
Illuminated
Ready
•
Normal mode
•
24 V supply connected to the AS-Interface OK
•
Communication present
Red
Illuminated
Not ready
Communication error at A or B slave
Red
Flashes
regularly
Not ready
Protocol error, no CTT3 communication with A-slave or no CTT2 communication with
B-slave
Yellow/
red
Flashes
regularly
Not ready
Slave address = 0
Red/
green
Flashes
regularly
Not ready
Peripheral error at A or B slave. There is no communication between GLK31A and
MOVIGEAR
®
inverter.
Yellow
Illuminated
Ready
Manual mode/local mode active
Summary of Contents for MOVIGEAR DAC B
Page 2: ...SEW EURODRIVE Driving the world...
Page 257: ......
