SEW-Eurodrive MOVIFIT SNI UFF41B, Manual, Page: 28 / 44

Share

Page: 28 / 44

SEW-Eurodrive MOVIFIT SNI UFF41B Manual Download Page 28

28

Manual – MOVIFIT® SNI Fieldbus Gateway UFF41B for MOVIGEAR® SNI

5

General information

Startup

5

Startup

5.1

General information

Correct project planning and installation are the prerequisites for successful startup. For
detailed project planning information, refer to the chapter "Project Planning" in this
document, and to the documentation for MOVIFIT

®

SNI and MOVIGEAR

®

SNI.

Check the installation by means of the installation information in the MOVIFIT

®

SNI,

MOVIGEAR

®

SNI operating instructions, the UFF41B fieldbus gateway manual, and the

manual at hand (refer to the chapter "System Description").

5.2

SNI gateway configuration

General
information

• Start MOVITOOLS

®

MotionStudio.

• From the "Startup" context menu, choose "SNI gateway configuration" The initial

screen of the SNI Gateway Configurator will open (see figure below).

The SNI gateway configuration allows for distributing the available 64 process data
words to the individual MOVIFIT

®

SNI and MOVIGEAR

®

SNI units depending on the

required function. The buttons have the following meaning:
• [Start Up] button: Start the SNI gateway configuration
• [Monitor] button: Process data monitor with integrated control function
• [Diagnose] button: Diagnostics of the fieldbus gateway and the configured

MOVIFIT

®

SNI and MOVIGEAR

®

SNI units

12140AEN

0

0

I

«
...
26
27
28
29
30
...
»

Summary of Contents for MOVIFIT SNI UFF41B













































Reviews:

No comments