SEW-Eurodrive MOVIFIT-FC Operating Instructions Manual Download Page 85

Page: 85 / 172

Electrical Installation

Fieldbus systems connection examples

Operating Instructions – MOVIFIT

-FC

Via M12 plug
connectors

The following figure depicts the basic connection topology for PROFIBUS using M12
plug connectors (the example shows a Han-Modular

-ABOX):

• The connection boxes have M12 plug connectors for connection to the PROFIBUS.

They comply with the recommendations of PROFIBUS directive no. 2.141 "Connec-
tion technology for PROFIBUS".

• To prevent malfunctions in the bus system due to reflections, etc., the PROFIBUS

segment must be terminated at the first and last physical stations with bus termi-
nating resistors.

• A plug-in bus terminator (M12) must be used for the last station in place of the

outgoing bus connection.

TIP

The example applies for the following connection boxes:
• Hybrid ABOX "MTA...-S52.-...-00"
• Han-Modular

-ABOX "MTA...-H12.-...-00"

812484491

[1] Bus terminating resistor

MOVIFIT

[1]

MOVIFIT

PROFIBUS DP

Summary of Contents for MOVIFIT-FC













































































































































































Search results

Summary of Contents for MOVIFIT-FC

Reviews:

SEW-Eurodrive MOVIFIT-FC, Operating Instructions Manual, Page: 85 / 172

Search results

Summary of Contents for MOVIFIT-FC

Reviews: